Each Tong Peal Caretaker is fully fitted with an electric wiring system which makes for the simplest of connection and operation - just what everyone needs.

Main Control Panel - Each motor is wired to a central control panel mounted on the side of the infeed hopper.  Each motor has an isolator next to it which is then wired directly to the control panel.  The wiring is housed in Copex flexible plastic tubing.  The main panel require one mains connection.

Remote Panel (see picture) - A small control panel is sited on the inspection table in easy reach of the operator.  This has sequence start and stop buttons, hopper belt speed controller, light switch and emergency stop button.

Safety Pull Cords - Above the inspection table a safety cord is fitted which allows any inspection personnel to pull and stop the machine in the event of an emergency.

Optional HMI Touch Screen Control - All Tong Peal equipment is now available with optional HMI touch screen controls, which allow operators to store settings in the machine’s memory to enable easy switching between any combination of pre-determined adjustments, programmed for specific crop conditions and cleaning requirements. The HMI control also allows for email or text alerts to the user in the event of a problem with the line, as well remote diagnostics. 

PRODUCTS ENQUIRY /

At Tong Peal we want you to make the right purchase. If you have any specific enquiries or questions regarding any of our products please fill in the boxes below and we will reply in the next 24 hours.